Before you can use ViCare Smart Climate devices, you must first set them up. Start by adding your first device in the ViCare app - for example a ViCare Radiator Thermostat.* This is because you need it to be able to use all the benefits of ViCare Smart Climate and control the temperature on your radiator individually.
Proceed as follows to set up the thermostat:
- Open “Settings” in the ViCare app and tap on “ViCare Smart Climate” there.
- Select “Add new component”.
Important note for Viessmann heaters of the latest generation: If the “Add new component” button is not available, please contact your local technical support. The boiler may need to be reconfigured in order to function properly. - Select the device and follow the instructions in the app.
After a successful pairing process, you see a confirmation screen in the app. The ViCare Radiator Thermostat is now connected to the system and can be installed on the radiator. You can find out how to install the thermostat here. Alternatively, follow the further instructions in the app or use the installation instructions included in the packaging. You can also find all instructions online here. Tip: Enter “ViCare” in the search bar and select “Operating instructions” on the left-hand side.
Note: The temperature values now displayed on the ViCare app dashboard are default values that you can change to the desired temperature. You can also set up time programs to further increase your comfort.
Further information:
*We recommend having ViCare Floor Heating Thermostats installed by your heating contractor.