If you want to reset the device to the factory settings, please note that the connection to your Viessmann One Base system or to the Vitoconnect and to all other ViCare components will be disconnected. Don't forget to remove this device after the factory reset.
To restore the factory settings, please follow these steps:
- Remove the device from the wall.
- Press the operating button C on the device for at least 10 seconds. The status LED lights up red.
- Press the operating button C 5 × in succession (within 10 seconds). The status LED flashes red and green alternately 3 times.
- The factory setting of the appliance is restored.
A Status LED
B This is where the temperature and humidity measurement is taking place. Do not cover!
C Control button
D QR code