If some of the parts of your home are not connected to the installation by ViCare Radiator Thermostats, you can still assure that a given area (here referred to as “Home Zone”) is operating under ViCare Smart Climate as well. “Home Zone” is active as a default but can be deactivated at any time.
“Home Zone” temperature value on the ViCare app dashboard is the temperature set manually. It means that valves in this area cannot measure the temperature thus you cannot directly operate ViCare Radiator Thermostats. Yet, it is highly recommended to set Time Programs for “Home Zone” as well – either manually or with Time Assistant.
“Home Zone” can be easily activated from the “Home Zone” settings area in your ViCare app. In case you have connected all your Rooms, you can deactivate “Home Zone” in the same way. This means you need to manually ensure the right radiator valve position to reach the desired temperature.
In most cases, the right valve positions to be set manually are as follows:
- 1 which corresponds to 12oC
- 2 which corresponds to 16oC
- 3 which corresponds to 20oC
- 4 which corresponds to 24oC
- 5 which corresponds to 28oC
 |
 |
Comments
0 comments
Article is closed for comments.